All maintenance operations are shown in the maintenance schedule below.
Only use Ducati original spare parts.
Legend to maintenance operations
- C/A) Check and adjust
- L) Oil or grease
- CL) Clean
- CH) Change
Operations | Predelivery | After first 1,000 km/ 620 miles | Every 1,000 km/ 620 miles | Every 10,000 km/ 6,200 miles | Every 20,000 km/ 12,400 miles |
Engine oil level | C/A | C/A | |||
Engine oil | CH | CH | |||
Engine oil filter | CH | CH | |||
Engine intake oil filter | CL | CL | |||
Tighten engine cylinder heads | C/A | ||||
Valve clearance | C/A | ||||
Timing belts | C/A | C/A | CH | ||
Spark plugs | C/A | CH | |||
Coolant level | C/A | C/A | C/A | ||
Change coolant | CH | ||||
Fuel filter | CH | ||||
Throttle body: timing and idling | C/A | C/A | |||
Air filter | CH | ||||
Engine oil pressure | C/A | C/A | |||
Engine cylinder compression | C/A | C/A | |||
Clutch and brake fluid level | C/A | C/A | C/A | ||
Change clutch and brake fluid | CH | ||||
Clutch and brake hydraulic controls | C/A | C/A | C/A | ||
Control cables | C/A | C/A | C/A | ||
Tyres: wear and pressure | C/A | C/A | C/A | ||
Steering bearing play | C/A | C/A | C/A | ||
Chain tension and alignment | C/A | C/A | |||
Brake pad wear | C/A | C/A | |||
Wheel hub bearings | C/A | ||||
Rear wheel cush drive rubbers | C/A | ||||
Fuel tank | CL | ||||
Change front fork oil | CH | ||||
Tightness, all nuts/bolts | C/A | C/A | C/A | ||
General lubrication | L | ||||
Battery liquid level | C/A | C/A |