MotoInstruction.ru
Mobile
version
Articles
& news
Site
map
Feed
back
Add to
bookmark
English Русский
Aprilia
BMW
Ducati
Harley
Honda
Kawasaki
Suzuki
Triumph
Yamaha
Honda:
Africa Twin▾
XRV750 (1989-2003) CRF1000L (2015-2020)
CB series▾
CB400SF [1] (1992-1999)
CBR series▾
CBR600RR (2007-2008)
VTX series▾
VTX1800C (2001-2008)

Motorcycle engine lube system Honda CRF1000L Africa Twin (2015-2020)

  • Main
  • Honda
  • Africa Twin
  • CRF 1000 L
  • Engine and systems
  • Lubrication system
Share with friends in:
Search only in this section of website:
See this section in russian language
Service information — lubrication system
General Caution: Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with...
Troubleshooting — lubrication system
Oil level too low Oil consumption External oil leak Worn piston rings Improperly installed piston rings Worn cylinders Worn valve stem seals Worn valve guide Low oil pressure Oil level low Clogged oil strainer Faulty oil pump Internal oil leak...
Lubrication system diagram
Lubrication system diagram CRF1000/A CRF1000D
Oil pressure inspection
Remove the engine oil filter cartridge (page 3-12). Apply engine oil to the O-ring and install the oil pressure attachment [1] onto the oil filter boss. Tool: Oil pressure gauge attachment 070MJ-0010101 Apply engine oil to the O-ring and install the...
Oil pump (CRF1000/A) — removal/installation
Removal/installation Remove the oil strainer (page 9-8). Remove the bolts [1] and oil pump [2]. Installation is in the reverse order of removal. Note: Align the oil pump driven shaft end with the oil pump drive shaft groove. Disassembly/assembly...
Oil pump (CRF1000D) — removal/installation
Removal/installation Remove the oil strainer (page 9-8). Remove the oil pump mounting bolts [1] and oil pump [2]. Installation is in the reverse order of removal. Note: Align the oil pump driven shaft end with the oil pump drive shaft groove....
Oil strainer — removal/installation
Removal/installation Drain the engine oil (page 3-12). Loosen the bolts [1] in a crisscross pattern in 2 or 3 steps, and remove the bolts and oil pan [2]. Remove the oil strainer [1] and seal ring [2]. Clean the oil strainer and check for damage,...

Similar subsections of other motorcycle models


Lubrication system motorcycle Harley-Davidson XL1200 (2012-2023)
Lube system motorcycle Kawasaki ZX6R/ZX600J (2000-2002, 3 generation)
Lubrication system motorcycle Suzuki 1000A/XA V-Strom (2014-2019)
Lube system motorcycle Triumph Rocket III (2004-2018)
Lube system motorcycle Yamaha FZ1 Fazer (2006-2015)

 
CRF1000L (2015-2020) 
  • Information for owner
  • Introduction to manual
  • Technical characteristics
  • Maintenance
  • Engine and systems
  • Engine repair
  • Cooling system
  • Lubrication system
  • Ignition system
  • Fuel system
  • Fuel injection
  • Transmission
  • Dual clutch transmission
  • Running gear and frame
  • Frame and hinged elements
  • Front suspension and handlebar
  • Rear suspension
  • Brake system
  • ABS (anti-lock brake system)
  • Electric equipment
  • Starting and charging system
  • Equipment and devices
  • Immobilizer system
  • Electrical circuits
XRV750 (1989-2003) 
  • Information for owner
  • Introduction to manual
  • Weekly checks
  • Maintenance
  • Troubleshooting
  • Engine and systems
  • Engine repair
  • Transmission
  • Cooling system
  • Fuel and exhaust systems
  • Ignition system
  • Running gear and frame
  • Brake system
  • Wheels and tires
  • Frame and hinged elements
  • Electric equipment
  • Equipment and devices
  • Lighting and lamps
  • Starting and charging system
  • Electrical circuits
Aprilia BMW Ducati Harley Honda Kawasaki Suzuki Triumph Yamaha
MotoInstruction.ru © 2021–2025 | Sitemap | Articles | Contacts | Site search | Add to bookmarks | Mobile version