Instrument and warning light bulbs — replacement (Honda XRV750)

0

1. Remove the fairing (see Chapter 8). Many of the bulbs are accessible with the instrument cluster in place. If access is restricted, displace the cluster from the bracket (see Section 15).

2. Carefully pull the bulbholder out of the instrument cluster, then pull the bulb out of the bulbholder (see illustrations). If the socket contacts are dirty or corroded, scrape them clean and spray with electrical contact cleaner before a new bulb is installed. Make sure the new bulb is of the correct wattage (see Specifications). Carefully fit the new bulb into the holder, then fit the holder into the housing.





3. Install the instrument cluster and/or fairing as required (see Chapter 8).

See this article in russian language

Article about repair motorcycles «Honda Africa Twin XRV 750» (1989-2003): «Instrument and warning light bulbs — replacement»: https://motoinstruction.ru/en/Honda/Africa-Twin/XRV750/electric/equipment/115170 <a href="https://motoinstruction.ru/en/Honda/Africa-Twin/XRV750/electric/equipment/115170">Instrument and warning light bulbs — replacement</a> - article about repair motorcycles «Honda Africa Twin XRV 750» (1989-2003) from section «Equipment and devices». [url=https://motoinstruction.ru/en/Honda/Africa-Twin/XRV750/electric/equipment/115170]Instrument and warning light bulbs — replacement[/url] - article about repair motorcycles «Honda Africa Twin XRV 750» (1989-2003) from section «Equipment and devices».