Every 8000 miles (12,000 km) or 12 months
Note: All models are fitted with a sidestand as standard equipment. A centrestand is available as an optional extra.
1. Check the stand spring(s) for damage and distortion. The spring(s) must be capable of retracting the stand fully and holding it retracted when the motorcycle is in use. If a spring is sagged or broken it must be replaced with a new one.
2. Lubricate the stand pivots regularly (see Section 12).
3. Check the stand and its mount for bends and cracks. Stands can often be repaired by welding.
4. On all except XL600V-H and J (1987 and 1988) models, check the operation of the sidestand switch by shifting the transmission into neutral, retracting the stand and starting the engine. Pull in the clutch lever and select a gear. Extend the sidestand. The engine should stop as the sidestand is extended. If the sidestand switch does not operate as described, check its circuit (see Chapter 9).