Swingarm and suspension linkage bearings — re-greasing (Honda XRV750 Africa Twin)

0

Non-scheduled maintenance

1. Over a period of time the grease will harden or dirt will penetrate the bearings due to failed seals.

2. Remove the swingarm and suspension linkage as described in Chapter 6 for cleaning and re-greasing of the bearings. Note that XL600V-H and V-J models are equipped with two grease nipples in the rear suspension linkage components, enabling fresh grease to be applied periodically - see Section 22.

(The article is based on materials from the website MOTOINSTRUCTION)

See this article in russian language

Rear swingarm and suspension — design description Suzuki DRZ 250 (1996-2007)
Inspecting the rear suspension linkage system Aprilia RS 125/3 (1998-2005)
Lubricating the rear suspension Yamaha FZ1 Fazer (2006-2015)
Exploded view — rear suspension units Triumph Rocket III (2004-2018)
Steering head bearings — adjustment (fall-away) Harley-Davidson V-Rod (2002-2006)

Article about repair motorcycles «Honda Africa Twin XRV 750» (1989-2003): «Swingarm and suspension linkage bearings — re-greasing»: https://motoinstruction.ru/en/Honda/Africa-Twin/XRV750/owner/service/115032 <a href="https://motoinstruction.ru/en/Honda/Africa-Twin/XRV750/owner/service/115032">Swingarm and suspension linkage bearings — re-greasing</a> - article about repair motorcycles «Honda Africa Twin XRV 750» (1989-2003) from section «Maintenance». [url=https://motoinstruction.ru/en/Honda/Africa-Twin/XRV750/owner/service/115032]Swingarm and suspension linkage bearings — re-greasing[/url] - article about repair motorcycles «Honda Africa Twin XRV 750» (1989-2003) from section «Maintenance».