Removal
Unscrew the caliper mounting bolts.
Detach the caliper from the disc.
Draw out the clip [A], and take off the pad pin [В].
Remove the brake pads [С].
Installation
Push the caliper piston in by hand as far as it will go.
Install the anti-rattle spring in place.
Install the brake pads.
Install the pad pin and clip. The clip must be "outside" of the pads.
Install the caliper (see Caliper Installation).
Warning! Do not attempt to drive the motorcycle until a full brake pedal is obtained by pumping the brake pedal until the pads are against the disc. The brake will not function on the first application of the pedal if this is not done.