Check conductivity of the following numbered terminals by connecting the hand tester and one 12 V battery to the junction box as shown.
★ If the tester does not read as specified, replace the junction box.
Relay circuit inspection (with the battery disconnected)
| Tester Connection | Tester Reading (Ω) | Tester Connection | Tester Reading (Ω) | ||
| Headlight Relay | *7-8 | ∞ | Starter Circuit Relay | 9-11 | ∞ |
| *7-13 | ∞ | 12-13 | ∞ | ||
| (+) (-) *13-9 | Not ∞ ** | (+) (-) 13-11 | ∞ | ||
| (+) (-) 12-11 | Not ∞ ** |
(*): U.S.A., Canada, Australia, and Malaysia Models only.
(**): The actual reading varies with the hand tester used.
(+): Apply tester positive lead.
(-): Apply tester negative lead.
Relay circuit inspection (with the battery connected)
| Battery Connection (+) (-) | Tester Connection | Tester Reading (Ω) | |
| Headlight Relay | *9-13 | *7-8 | 0 |
| Starter Circuit Relay | 11-12 | (+) (-) 13-11 | Not ∞ ** |
(*): U.S.A., Canada, Australia, and Malaysia Models only.
(**): The actual reading varies with the hand tester used.
(+): Apply tester positive lead.
(-): Apply tester negative lead.