Removal
Remove the Fuel Tap Position Lever (see Fuel Tank Removal).
Remove the fuel tank and drain it.
Remove:
- Bolts [A]
- Nylon Flat Washers [B]
- Fuel Tap [C]
Installation
Be sure the О-rings [A] is in good condition to prevent leaks.
Be sure the nylon flat washers [B] are in good condition to prevent leaks.
Do not use steel washers in place of the nylon flat washers, because they will not seal the bolts properly and fuel will leak.
Be sure to clamp the fuel hoses to the tap to prevent leaks.
Torque - Fuel Tap Bolts: 2.5 N·m (0.25 kg·m, 22 in·lb)