Camshaft chain tensioner — installation (Kawasaki ZX-6R/ZX-600-J)

0

Release the stopper [A] and push the push rod [B] into the tensioner body [C].



Insert the push rod so that the push rod teeth are leaved five notches.

Install the tensioner body so that the stopper faces upward.

Tighten the tensioner mounting bolts [B].

Torque - Camshaft Chain Tensioner Mounting Bolts: 11 N·m (1.1 kg·m, 95 in·lb)

Install the spring and washer.

Tighten the cap bolt [A].

See this article in russian language

Article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002): «Camshaft chain tensioner — installation»: https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/repair/111295 <a href="https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/repair/111295">Camshaft chain tensioner — installation</a> - article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002) from section «Engine repair». [url=https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/repair/111295]Camshaft chain tensioner — installation[/url] - article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002) from section «Engine repair».