Removal
Mark the position of the shift lever on the shift shaft so that it can be installed later in the same position.
Remove the shift lever and shift pedal.
Installation
Install the shift pedal [A] so that the distance between the center of the shift pedal and the center line of the shift rod [B] is about 3 mm by loosening the front and rear locknuts [C] and turning the rod.
Note. The locknut next to the groove [D] of the rod has left-hand threads.
★ If necessary, adjust the pedal position from the standard position to suit you as follows.
Loosen the front and rear rod locknuts.
Turn the rod to adjust the pedal position.
Tighten the locknuts securely.