Removal
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle.
1. Raise and support the motorcycle.
2. Unhook the spring from the side stand and remove it from the motorcycle.
Warning! Wear hand, eye and face protection when unhooking the stand spring. Take great care to minimise the risk of personal injury and loss of components.
3. Unscrew the nut from the side stand pivot bolt.
4. Unscrew the pivot bolt and remove the stand from the bike.
Installation
1. Lubricate the pivot bolt shoulder and side stand pivot with multi-purpose grease.
2. Fit the stand to the bike and insert the pivot bolt, tightening it 20 Nm.
3. Fit the locknut to the pivot bolt and tighten it to 25 Nm.
4. Hook the spring onto its frame lug then carefully hook it onto the stand lug.
Warning! Wear hand, eye and face protection when fitting the stand spring. Take great care to minimise the risk of personal injury and loss of components.
5. Check the operation of the side stand before riding the motorcycle. Ensure the spring holds the stand securely in the retracted position.