| Fault Code | Possible cause | Action |
| P0560 | Bike voltage system fault | View & note diagnostic tool "sensor" data. Ensure voltage across battery is acceptable, note voltage. Disconnect ECM and proceed to pinpoint test 1 |
Pinpoint tests
| Test | Result | Action |
| 1 Check cable and terminal integrity: - ECM pin A20 | OK | Proceed to test 2 |
| Faulty | Rectify fault, proceed to test 3 | |
| 2 With Ignition "on", check voltage at: - ECM pin A20 | Same as "across battery" voltage | Proceed to test 3 |
| Less than "across battery" voltage | Locate and rectify wiring fault, proceed to test 3 | |
| 3 Reconnect harness, clear fault code and run engine to verify fault cleared | OK | Action complete - quit test |
| Fault still present | Contact Triumph service |
Circuit diagram
