Rider's seat
1. Engage the seat's tongue under the fuel tank.
2. Lower the rear of seat ensuring its hooks locate into the slots on the seat bridge.
3. Fit the fixing to the rear of the seat and tighten to 3 Nm.
1. Fixing
Warning!
- The rider's seat is only correctly retained and supported once the fixing is correctly tightened. Never ride the motorcycle with the fixing loose or removed, as the rider's seat will not be secure and may move.
- A loose or detached seat may cause loss of motorcycle control and an accident.
4. Grasp the seat and pull firmly upwards to ensure that it is securely retained.
5. Refit the passenger seat/seat cowl as described below.
Passenger seat/seat cowl
1. Engage the seat's tongue into the rear seat bridge.
2. Align the locating peg to the lock and press down engaging the seat lock. An audible click can be heard when the seat is fully engaged in its lock.
1. Locating peg; 2. Lock; 3. Rear seat bridge; 4. Tongue
Warning!
- Never ride the motorcycle with the passenger seat or seat cowl detached or removed.
- To prevent detachment of the seat during riding, after fitting always grasp the seat and pull firmly upwards. If the seat is not correctly secured it will detach from the lock. A loose or detached seat could cause loss of motorcycle control and an accident.
3. Grasp the seat and pull firmly upwards to ensure that it is securely retained.