Secondary air injection solenoid valve — removal (Triumph Street Triple 765 R/RS)
- Main
- Triumph
- Street Triple
- 765 R/RS [4]
- Engine and systems
- Fuel and control system
- Secondary air injection soleno…
Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
1. Release the hoses attached to the valve.
2. Disconnect the multiplug.
1. Solenoid valve; 2. Retainer; 3. Hose clips; 4. Multiplug
3. Gently pull the valve to detach it from its retainer.
See this article in russian language
This article has been reviewed: Kirill Prokofiev
Similar articles about motorcycles of other brands
«C49» PAIR control solenoid valve circuit malfunction Suzuki V-Strom DL-650 (2004-2011)Intake duct control solenoid valve — inspection Honda VTX 1800 C (2001-2008)
Solenoid Valve Inspection (Service Code 13,14,17,18) Kawasaki Versys 650 (2007-2025)
Adjusting the valve clearance Yamaha FZ1 Fazer (2006-2015)
Serial fuel injection port Harley-Davidson V-Rod (2002-2006)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Engine and systems
- Engine repair
- Fuel and control system
- Lubrication system
- Cooling system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
- Electrical circuits