Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
1. Slide the twist grip position sensor onto the handlebar in the orientation noted for removal.
2. Route the twist grip harness to the main harness as noted for removal.
3. Connect the harness to the main harness the attach the connector to its bracket.
1. Twist grip connector; 2. Bracket
4. Position the harness around the headstock as noted for removal.
5. Fit the cable guide to the headstock and tighten the new fixings to 13 Nm.
6. Fit the rubber band as noted for removal.
1. Fixings; 2. Cable guide; 3. Rubber band
Perform the following operations: