Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Note: Note the routing of the harness for the gear position sensor for installation.
1. Follow the route of the harness for the gear position sensor, disconnect its multiplug from the main harness.
2. Release the fixings and remove the gear position sensor from the engine.
1. Fixings; 2. Gear position sensor; 3. Harness
3. Remove and discard the two O-rings from the gear position sensor.