Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
1. Release the clutch cable from the actuating arm (see Clutch cable - removal).
2. Place an oil catch tray beneath the clutch cover to collect any oil that may spill out on removal.
3. Release the fixings securing the clutch cover to the crankcases. Note the position of the copper washer for installation.
1. Clutch cover; 2. Copper washer position
4. Carefully withdraw the cover.
5. Remove the gasket and clean the surfaces of the crankcase and the clutch cover using a lint free cloth.