Pull the headlight unit [A] and drop it out.
Pull the headlight connector [B].
Remove the headlight dust cover [C].
Push the hook [A] to unlock.
Take out the bulb [A].
Caution! When handling the quartz-halogen bulb, never touch the glass portion with bare hands. Always use a clean cloth. Oil contamination from hands or dirty rags can reduce bulb life or cause the bulb to explode.
Clean off any contamination that inadvertently gets on the bulb with alcohol or a soap and water solution.
Replace the headlight bulb.
Fit the dust cover [A] with the TOP mark [B] upward onto the bulb [C] firmly as shown.
- Good [D]
- Bad [E]
Tighten:
- Torque - Headlight Rim Screws: 2.9 N·m (0.30 kgf·m, 26 in·lb)
After installation, adjust the headlight aim (see Headlight aiming inspection in the Periodic Maintenance chapter).