Lighting system — general info This models adopt the daylight system and has a headlight relay in the relay box. The headlight does not go on when the ignition switch and the engine stop switch are first turned on. The headlight comes on after the starter button is released and...
Headlight bulb replacement Remove the headlight rim screws [A] on both sides. Pull the headlight unit [A] and drop it out. Pull the headlight connector [B]. Remove the headlight dust cover [C]. Push the hook [A] to unlock. Take out the bulb [A]. Caution! When handling the...
Headlight body removal Remove the headlight rim screws [A] on both sides. Pull the headlight unit [B] and drop it out. Remove the headlight body bolts [A], then take off the body [B].
City light bulb replacement (Europe models) Remove the headlight unit (see Headlight bulb replacement ). Pull out the socket [A] together with the bulb. Remove the wedge-base type bulb [A], pull the bulb straight out of the socket [B]. Replace the bulb with a new one. Caution! Do not turn the...
Tail/brake light removal/installation Remove the rear fender (see Rear fender removal in the Frame chapter). Remove the nuts [A]. Remove the tail/brake light from the rear fender. Tighten: Torque - Tail/Brake Light Unit Mounting Nuts: 5.9 N·m (0.60 kgf·m, 52 in·lb)
Tail/brake light bulb replacement Unscrew the screw [A] in the taillight lens. Pull the lens [B] off. Push the bulb [A] in, turn it counterclockwise [B], and pull it out. Replace the bulb with a new one. With the front pin [A] up and the rear pin [B] down, insert the new bulb by...
Licence plate light bulb replacement Remove: Bolts [A] Licence Plate Light Cover [B] Remove the licence plate light lens screws [A] and take off the lens [B]. Push the bulb [A] in, turn it counterclockwise [B], and pull it out. Insert the new bulb [A] by aligning the pins [B] with the...
Turn signal light bulb replacement Remove the turn signal light lens screws [A] and remove the lens [B]. Push the bulb [A] in the socket and turn the bulb counterclockwise. Replace the bulb.
Turn signal relay inspection Remove: Tool Box (see Tool box removal in the Frame chapter) Turn Signal Relay [A] Connect one 12 V battery and turn signal lights as indicated in the figure, and count how may times the lights flash for one minute. Turn Signal Relay [A] Turn Signal...