Frame and attachments of motorcycle Kawasaki ZX-6R/ZX-600-J (2000-2002)

Frame exploded view
G: Apply grease. L: Apply a non-permanent locking agent. 1. California Model. T1: 25 N·m (2.5 kg·m, 18.0 ft·lb) T2: 34 Nm (3.5 kg·m, 25 ft·lb) T3: 49 N·m (5.0 kg·m, 36 ft·lb) T4: 44 N·m (4.5 kg·m, 33 ft·lb) T5: 59 N·m (6.0 kg·m. 43 ft·lb) 1. PN...

Rear seat — removal and installation
Removal Insert the ignition switch key into the seat lock [A], turning the key counterclockwise, pulling up on the rear of the seat [B], and pulling the seat backward. Installation Slip the rear seat hooks [A] into the hollow-cubic bracket [B] on...

Front seat — removal and installation
Removal Remove: Rear Seat (see Rear Seat Removal) Mounting Bolt [A] Set Bracket (rear) [B] Remove the front seat [C] by pulling it up on the rear and to the rear. Installation Slip the front seat hook [A] under the brace [B] on the seat bracket...

Seat cover — removal and installation
Removal Remove: Seats Bolts and Grab Rails [A] Screws and Seat Lock [B] Screws [C] (Left and Right) Pull the seat cover backward. Installation Set the seat cover [A], and insert the rivet [B] into the holes in the seat cover and rear fender. Push in...

Inner fairing — removal and installation
Removal Remove the screws [A]. Remove the inner fairing [B].

Upper fairing — removal and installation
Removal Removal: Inner Fairings Spring Bands [A] (Left and Right) Screws [B] (Left and Right) Remove: Rear View Mirrors [A] Bolts [B] Remove: Air Vent Filter Hose [A] Headlight/Turn Signal Light Lead Connector [B] Lipper Fairing

Lower fairing — removal and installation
Removal Remove: Screws [A] [B] Allen Bolts [C] Pull the lower front part of the lower fairing outward to clear the stoppers [D]. Remove the lower fairing. Remove the other lower fairing in the same manner. Note. When removing the left and right...

Front fender — removal and installation
Removal Remove: Brake Hose Clamps [A] (Left and Right) Bolts [B] and Screws [C] (Left and Right) Remove the front fender [D].

Rear fender — removal and installation
Removal Remove: Seats Fuel Tank Seat Cover Junction Box Starter Relay Assy Turn Signal Relay Battery Rear Brake Reservoir Mounting Bolt Tail/Brake Light Lead Connectors [A] Clamp [B] Tail/Brake Light [C] Remove: Turn Signal Light Lead Connectors [A]...

Rear frame — removal and installation
Removal Remove: Rear Fender (see Rear Fender Removal) Bolts [A] and IC Igniter Bracket [B] Clamps for Main Harness Frame Bolts and Nuts [C] Installation Tighten the frame bolts and nuts. Torque - Rear Frame Bolts and Nuts: 44 N·m (4.5 kg·m, 33...