Removing
Disconnect the wire from the negative battery terminal.
Before removing the starter, you must first drain the liquid from the cooling system (see «Coolant - replacement»).
1. Loosen the worm-drive hose clamps with a Phillips screwdriver.
![](https://motoinstruction.ru/img/honda/1/110690.jpg)
2. Using a 10 mm wrench, unscrew the nut of the starter positive wire and remove it.
![](https://motoinstruction.ru/img/honda/1/110691.jpg)
3. Remove the cooling system tee and set it aside.
![](https://motoinstruction.ru/img/honda/1/110692.jpg)
4. Using a 10 mm wrench, unscrew the bolt securing the cooling system pipe.
![](https://motoinstruction.ru/img/honda/1/110693.jpg)
5. Remove the pipe.
![](https://motoinstruction.ru/img/honda/1/110694.jpg)
6. Using a 10 mm wrench, unscrew the two starter mounting bolts; one of them is attached to the negative battery cable.
![](https://motoinstruction.ru/img/honda/1/110695.jpg)
7. We remove the starter by moving it to the right from the seat. To make removal easier, it is recommended to slightly turn the starter in different directions.
![](https://motoinstruction.ru/img/honda/1/110696.jpg)
Installation
Installation is carried out in the reverse order.