If all the conditions for a successful engine start are met, but the electric starter does not turn on, it is necessary to check the operability of the sensors for the side stop, neutral gear and clutch lever (see «Diagnostics of the ignition system»), as well as the starter and starter motor relays.
To check the starter relay, remove it from the motorcycle (see «Starter relay - removal and installation») and connect to the battery, after which we check the presence of conductivity on the relay contacts with an ohmmeter, as shown in the figure.
![](https://motoinstruction.ru/img/honda/1/110685.jpg)
1 - battery; 2 - starter relay; 3 - ohmmeter
To check the starter motor, the electric starter must be removed from the motorcycle (see «Starter - removal and installation»), connect the wire from the positive battery terminal to the positive terminal of the starter motor, and the negative terminal to the starter housing. The electric motor should start. If the electric motor does not start, it must be disassembled and repaired (see «Starter - disassembly and assembly»).