Steering wheel — removal and installation To remove the steering wheel, you must first remove the steering switch blocks and the front brake master cylinder (see « Steering wheel and attachments - disassembly and assembly »). Removing 1. Use a thin slotted screwdriver or an awl to pry up...
Front fork legs — oil change It is recommended to change the oil in the fork every 15,000 km or during service of the fork stays. Place the motorcycle on the center stand. 1. We install a container for draining the oil under the fork feather and unscrew the drain bolt with a 10...
Front fork feathers — removal and installation Removing We place the motorcycle on the center stand and hang the front wheel, loading the rear of the motorcycle. To remove the front fork legs, you must first remove the brake calipers (see « Front brake caliper - removal, cleaning, installation...
Front fork legs — disassembly We place the motorcycle on the center stand and hang the front wheel, loading the rear of the motorcycle. Front wheel removed (see « Front wheel - removal and installation »). Front wheel guard removed (see « Front wheel guard - removal and...
Front fork legs — assembly Front fork parts: 1 - pen plug; 2 - spring thrust washer; 3 - top guide; 4 - carrier pipe; 5 - bottom guide; 6 - shock absorber bolt with copper washer; 7 - movable pipe; 8 - spring; 9 - shock absorber tip; 10 - rebound spring; 11 - shock absorber...
Steering column — check without disassembly To check the condition of the steering column bearings, place the motorcycle on the center stand and hang the front wheel (the wheel must not touch the ground). 1. Holding the steering wheel, slowly turn the fork left and right from lock to lock....
Steering column — disassembly, assembly, replacement of bearings Before removing the steering column, you must remove the steering wheel with controls (see « Steering wheel - removal and installation »), front wheel (see « Front wheel - removal and installation »), front wheel guard (see « Front wheel guard -...