Wheels and tires of motorcycle Honda CB400SF/1 (1992-1999)

Front wheel — removal and installation
For the convenience of work on removing the front wheel, it is recommended to first remove the brake calipers (see « Front brake caliper - removal, cleaning, installation »). We put the motorcycle on the center stand and hang the front wheel....

Front wheel — replacement of bearings and seals
Bearings and seals are replaced with the front wheel removed (see « Front wheel - removal and installation »). I. Place the wheel on a flat, flat surface. Attention! It is not allowed to put excessive loads on the wheel (stand up or kneel, sit...

Rear wheel — removal and installation
We put the motorcycle on the center stand and hang the rear wheel. Removing I. Using a 12 mm wrench, unscrew the lock nut, and with a 14 mm wrench, unscrew the chain tension adjusting nut. 2. Fix the wheel axle with a 17 mm wrench. 3. Using a 24 mm...

Rear wheel — replacing bearings and seals
The bearings will need to be replaced if, during the rotation of the suspended wheel, there is transverse or radial play, clicks are heard, extraneous noise, the wheel rotates with jamming or with excessive force. Oil seals must be replaced in case...

Final drive sprocket hub dampers — check and replace
Checking the dampers of the hub of the driven sprocket is carried out with the rear wheel removed. 1. Remove the drive sprocket assembly, as shown in the photo. 2. We remove the four dampers from the clip, prying them for ease of removal with a thin...