Lighting system and lamps of motorcycle BMW F650GS (2000-2007)
See this section in russian language
Technical data of light system
Lights HeadlightHalogen headlight and manual beam throw adjustment Bulbs High beam/low beamH4 halogen,12V 60/55W, asymmetric Parking light12V 5WType T8/4 Brake light/rear light12V 21/5WType P25-2 Flashing turn indicator12V 10WType P25-1
Lights HeadlightHalogen headlight and manual beam throw adjustment Bulbs High beam/low beamH4 halogen,12V 60/55W, asymmetric Parking light12V 5WType T8/4 Brake light/rear light12V 21/5WType P25-2 Flashing turn indicator12V 10WType P25-1
Removing and installing headlight
Place motorcycle on its centre stand. Remove left and right covers. Note: Note washers and rubber ring. Remove the windshield. Remove the fasteners securing the cockpit fairing. Disconnect the multi-pin plug. Pull the rubber boot to the rear. Pull...
Place motorcycle on its centre stand. Remove left and right covers. Note: Note washers and rubber ring. Remove the windshield. Remove the fasteners securing the cockpit fairing. Disconnect the multi-pin plug. Pull the rubber boot to the rear. Pull...
Removing and installing rear light
Remove the lid of the stowage compartment. Remove the number plate holder complete with the rear light from the frame. Secure the number plate holder to the rear frame with a cable tie or similar. Remove the screws securing rear light (2)....
Remove the lid of the stowage compartment. Remove the number plate holder complete with the rear light from the frame. Secure the number plate holder to the rear frame with a cable tie or similar. Remove the screws securing rear light (2)....
Bulb for low-beam/high-beam headlight
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Place motorcycle on its centre stand. Disconnect the multi-pin plug. Pull the rubber boot to the rear. Turn...
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Place motorcycle on its centre stand. Disconnect the multi-pin plug. Pull the rubber boot to the rear. Turn...
Replacing bulb of parking light
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Place motorcycle on its centre stand. Pull the socket (6) to the rear and out of the headlight housing. Press...
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Place motorcycle on its centre stand. Pull the socket (6) to the rear and out of the headlight housing. Press...
Replacing bulb of flashing turn indicator
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Remove turn-indicator cover. Press the bulb to the rear and turn it counterclockwise to release. Installation...
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Remove turn-indicator cover. Press the bulb to the rear and turn it counterclockwise to release. Installation...
Replacing bulb of rear lights
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Remove rear-light lens. Press the bulb to the rear and turn it counterclockwise to release. Installation is the...
Caution! Always switch off the ignition before changing bulbs. Note: Do not touch inside of reflector and glass of bulbs with bare hands. Remove rear-light lens. Press the bulb to the rear and turn it counterclockwise to release. Installation is the...
Checking and adjusting headlight beam angle
Vertical adjustment Set the spring tension to the basic setting. Rider's weight on motorcycle (75 kg/165 lbs). Manually adjust the headlight range by turning adjusting screw (1). Setting for headlight beam angle adjuster: X — 10 cm (4 in) at a...
Vertical adjustment Set the spring tension to the basic setting. Rider's weight on motorcycle (75 kg/165 lbs). Manually adjust the headlight range by turning adjusting screw (1). Setting for headlight beam angle adjuster: X — 10 cm (4 in) at a...
- Information for owner
- Introduction to manual
- Maintenance
- Engine and systems
- Engine repair
- Ignition system
- Fuel and exhaust systems
- Cooling system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Lighting and lamps