- Pour engine oil in each oil pocket in the cylinder heads.
Note: Be sure to check the valve clearance. (2-8)
- Install the new gaskets to the cylinder head covers.
- Apply SUZUKI BOND to the cam end caps of the gaskets as shown.
- 99104-31140: SUZUKI BOND "1207B" or equivalent
Caution: Use the new gaskets to prevent oil leakage.
- Place the cylinder head covers on the cylinder heads.
- Fit a new gasket 1 to each head cover bolts.
Caution: Use a new gasket to prevent oil leakage.
- Tighten the head cover bolts in ascending order of numbers to the specified torque.
Head cover bolt (Front and Rear): 11 Nm (1.1 kgf·m, 8.0 lb·ft)
