Component parts and work to be done Under the name of each system or unit, is its exploded view. Work instructions and other service information such as the tightening torque, lubricating points and locking agent points, are provided. Example: Front wheel 1. Brake disc; 2. Dust seal;...
Abbreviations used in this manual A ABDC: After Bottom Dead Center AC: Alternating Current ACL: Air Cleaner, Air Cleaner Box API: American Petroleum Institute ATDC: After Top Dead Center A/F: Air Fuel Mixture B BBDC: Before Bottom Dead Center BTDC: Before Top Dead Center B+: Battery...
Warning/caution/note of general information Please read this manual and follow its instructions carefully. To emphasize special information, the symbol and the words WARNING, CAUTION and NOTE have special meanings. Pay special attention to the messages highlighted by these signal words....
General precautions Warning: Proper service and repair procedures are important for the safety of the service mechanic and the safety and reliability of the motorcycle. When 2 or more persons work together, pay attention to the safety of each other. When it is...
Left and right side of motorcycle Right side Left side Difference between illustration and actual motorcycle may exist depending on the markets.
Serial number location The frame serial number or V.I.N. (Vehicle Identification Number) 1 is stamped on the right side of the steering head pipe. The engine serial number 2 is located on the right side of the crankcase. These numbers are required especially for...
Fuel, oil and engine coolant recommendation fuel (for USA and Canada) Use only unleaded gasoline of at least 90 pump octane (R/2 + M/2). Gasoline containing MTBE (Methyl Tertiary Butyl Ether), less than 10% ethanol, or less than 5% methanol with appropriate cosolvents and corrosion inhibitor is permissible. Fuel (for...
Break-in procedures During manufacture only the best possible materials are used and all machined parts are finished to a very high standard but it is still necessary to allow the moving parts to "BREAK-IN" before subjecting the engine to maximum stresses. The future...
Cylinder identification The cylinders of this engine are identified as #1 and #2 cylinder, as counted from rear to front (as viewed by the rider on the seat.)
Information labels VZR1800 VZR1800UF 1. Noise label A (For E-03, 24, 33) 2. Information label A (For E-03, 28, 33) 3. Vacuum hose routing label A (For E-33) 4. Fuel caution label A (For E-02, 24) 5. Fuel information label A A 6. Manual notice label A (For E-03, 33) 7....
Specifications dimensions and dry mass Overall length — 2 450 mm (96.5 in) — For E-03, 33; 2 480 mm (97.6 in) — For others Overall width — 875 mm (34.4 in) Overall height — 1 185 mm (46.7 in) Wheelbase — 1 710 mm (67.3 in) Ground clearance — 130 mm (5.1 in) Seat height — 705 mm (27.8 in)...