Front wheel — removal Construction 1. Brake disc; 2. Dust seal; 3. Bearing; 4. Spacer; 5. Collar; 6. Front wheel; A. Front axle; B. Brake disc bolt ITEM Nm kgf·m lb·ft A 100 10.0 72.5 B 23 23.0 16.5 Removal Remove the brake calipers 1, left and right. Caution: Do not...
Removal rear wheel Remove the brake caliper bracket mounting bolt 1. Remove the cotter pin 2. (For E-03, 28, 33) Hold the rear axle with the special tool and remove the axle nut 3. 09944-28320: Hexagon socket Raise the rear wheel off the ground and support the...
Disassembly rear wheel Flatten the lock washers. Remove the bolts, washers and plates. Remove the driven hub joint 1 with the special tool and wooden block. 09913-50121: Oil seal remover Remove the O-ring 1.
Inspection and disassembly rear wheel Wheel damper Inspect the damper for wear or damage. Replace the damper if there is anything unusual. Remove the dampers with a screw driver. WHEEL ( 9-73 ) WHEEL AXLE ( 9-9 ) TIRE ( 2-27 and 9-73 ) BRAKE DISC ( 9-69 ) Remove the brake disc 1. Wheel...
Reassembly and installation rear wheel Reassemble and install the rear wheel in the reverse order of removal and disassembly. Pay attention to the following points: Wheel bearing Apply SUZUKI SUPER GREASE "A" to the wheel bearings. 99000-25010: SUZUKI SUPER GREASE "A" or equivalent...
Tire and wheel — removal and installation Tire removal The most critical factor of tubeless tire is the seal between the wheel rim and the tire bead. For this reason, it is recommended to use a tire changer that can satisfy this sealing requirement and can make the operation efficient as...