- Install the dowel pins and gasket 1.
Caution: Use the new gasket to prevent oil leakage.
- Install the generator cover and tighten its bolts.
Note: Fit the new gasket washers to the bolts А.
Caution: Use the new gasket to prevent oil leakage.
- Apply engine oil to the new O-ring and install the generator cover plug.
Caution: Use the new O-ring to prevent oil leakage.
- Tighten the generator cover plug 2 and valve timing inspection plug 3 to the specified torque.
Generator cover plug: 16 Nm (1.6 kgf·m, 11.5 lb·ft)
Valve timing inspection plug: 23 Nm (2.3 kgf·m, 16.5 lb·ft)
- Install the generator cover cap 4.
