- Brake lever position (distance «a» from the throttle grip to the brake lever)
Notes:
- While pushing the brake lever forward, turn the adjusting dial «1» until the brake lever is in the desired position.
- Be sure to align the setting on the adjusting dial with the arrow mark «2» on the brake lever holder.
Direction «b»: Distance «a» is the largest.
Distance «a»: Direction «c» is the smallest.
Warnings!
- After adjusting the brake lever position, make sure the pin on the brake lever holder is firmly inserted in the hole in the adjusting dial.
- A soft or spongy feeling in the brake lever can indicate the presence of air in the brake system. Before the vehicle is operated, the air must be removed by bleeding the brake system. Air in the brake system will considerably reduce in loss of control and possibly an accident. Therefore, check and if necessary, bleed the brake system.
Caution! After adjusting the brake lever position, make sure there is no brake drag.
