- Screws (1): 5 Nm (0.5 Kgm).
- Screws (2): 5 Nm (0.5 Kgm).
Remove the fuel tank; see 4.1.1.
Release and remove the two screws (1).
Release and remove the two screws (2) and collect the
nuts from beneath the screws.
Remove the airbox cover (3).
Slacken the clip (4).
Remove the airbox complete with air cleaner.
Note. Block off the carburetor opening with a clean cloth to prevent the ingress of debris into the intake ducts.