Final inspection and function check (BMW R1150GS)

0

Clutch.

Check gear shift action.

Handbrake and foot brake

Check lights and signalling equipment:

• Front and rear parking lights
• Instrument lighting
• Low and high headlight beams, headlight flasher
• Brake light (operate brake at front and rear)
• Turn signals left/right
• Hazard warning flashers
• Horn
• Telltale and warning lights
• Instruments

Where necessary, check function of optional extras:

• ABS: perform starting test. When a speed of 5 km/h (app. 3 mile/h) is reached, both ABS warning lights must go out.

If necessary, take the motorcycle for a test ride.

Confirm pre-delivery check in Service and Technical Booklet.

Final cleaning

Clean the motorcycle.

Note: Do not use a steam or high-pressure water jet. The high steam or water pressure could damage seals, the hydraulic system or electrical components.

See this article in russian language

Odometer reducer — check Suzuki DRZ 250 (1996-2007)
Connecting rod big end bearing selection/crankpin wear check Triumph Rocket III (2004-2018)
ECU self-diagnostic function Yamaha FZ1 Fazer (2006-2015)
Final drive exploded view Kawasaki ZX6R/ZX600J (2000-2002)
Wheels and tires — check Honda CB 400 SF (1992-1999)

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Final inspection and function check»: https://motoinstruction.ru/en/BMW/R/R1150GS/owner/intro/111581 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/owner/intro/111581">Final inspection and function check</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Introduction to manual». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/owner/intro/111581]Final inspection and function check[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Introduction to manual».