Check for coolant in system (Harley V-Rod VRSCA)

0

Coolant may be visible in the overflow bottle but not present in the rest of the cooling system. To ensure coolant is present:

1. Remove air filter top. See 1.4 Airbox and air filter.



2. See Figure 1-12. Remove cooling system air bleed plug.

3. Gently squeeze vertical water pump coolant hose on right side of engine.

4. Coolant should be visible in the air bleed hole. If coolant is not visible, see 6.3 Engine coolant.

See this article in russian language

Article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006): «Check for coolant in system»: https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/owner/service/110448 <a href="https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/owner/service/110448">Check for coolant in system</a> - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Maintenance». [url=https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/owner/service/110448]Check for coolant in system[/url] - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Maintenance».