Wheels and tires of motorcycle Suzuki DL650 V-Strom (2004-2011)

Front wheel construction
1. Brake disc; 2. Dust seal; 3. Bearing; 4. Center spacer; 5. Front wheel; 6. Tire valve; A. Front axle; B. Brake disc bolt ITEM N·m kgf·m lb·ft A 65 6.5 47.0 B 23 2.3 16.5

Front wheel — removal
Remove the right and left brake calipers. ( 7-59 ) Loosen the axle pinch bolt (1) on the right front fork leg. Caution! Do not operate the brake lever while removing the calipers. Slightly loosen the front axle with the special tool. 09900-18710:...

Front wheel — inspection and disassembly
Tire ( 7-79 ). Brake disc ( 7-65 ). Remove the brake discs. Dust seal Inspect the dust seal lip for wear or damage. If any damages are found, replace the dust seal with a new one. Remove the dust seal with the special tool. 09913-50121: Oil seal...

Front wheel — reassembly and remounting
Reassemble and remount the front wheel in the reverse order of removal and disassembly. Pay attention to the following points: A. Left; B. Right Wheel bearing Apply SUZUKI SUPER GREASE to the wheel bearings. 99000-25030: SUZUKI SUPER GREASE "A"...

Rear wheel construction
1. Rear axle; 2. Dust seal; 3. Brake disc; 4. Collar; 5. Bearing; 6. Rear wheel; 7. Tire valve; 8. Damper; 9. Spacer; 10. Bearing; 11. Retainer; 12. Sprocket mounting drum; 13. Rear sprocket; 14. Bearing; 15. Dust seal; 16. Collar; A. Brake disc...

Rear wheel — removal
Remove the cotter pin. (For E-03, 28, 33) Loosen the rear axle nut. Raise the rear wheel off the ground and support the motorcycle with a jack or wooden block. Remove the axle nut and draw out the rear axle. Caution! Do not operate the brake pedal...

Rear wheel — inspection and disassembly
Tire: ( 7-79 ) Wheel: ( 7-10 and 7-79 ) Rear axle Using a dial gauge, check the rear axle for runout. If the runout exceeds the limit, replace the rear axle. Axle shaft runout: Service Limit: 0.25 mm (0.010 in) 09900-20607: Dial gauge (1/100 mm)...

Rear wheel — reassembly and remounting
Reassemble and remount the rear wheel in the reverse order of removal and disassembly. Pay attention to the following points: A. Left; B. Right Bearing Apply SUZUKI SUPER GREASE to the bearings before installing. 99000-25030: SUZUKI SUPER GREASE "A"...

Tire and wheel — inspection
Tire removal The most critical factor of a tubeless tire is the seal between the wheel rim and the tire bead. For this reason, it is recommended to use a tire changer that can satisfy this sealing requirement and can make the operation efficient as...