1. Remove:
- Rider seat
Refer to "GENERAL CHASSIS".
2. Remove:
- Fuel tank
Refer to "FUEL TANK".
- Air filter case
Refer to "AIR FILTER CASE".
3. Check:
- Fuel hose "1"
- Vacuum hoses "2"
- Breather hose "3"
- Over flow hose "4"
Cracks/damage → Replace.
Loose connection → Connect properly.
Before removing the fuel hoses, place a few rags in the area under where it will be removing.
Notice: Make sure the fuel tank breather hose is routed correctly.
![](https://motoinstruction.ru/img/yamaha/20/126296.jpg)
4. Install:
- Fueltank
Refer to "FUEL TANK".
5. Install:
- Rider seat
Refer to "GENERAL CHASSIS".