Torque wrench settings:
- Single to double connecting link (1): 50 Nm (5.0 kg·m)
Remove the complete linkage assembly; see 7.12.3.
Undo and remove the nut (1).
Withdraw the bolt on the opposite side and collect the washer.
Remove the single connecting link.
Remove the right-hand (2) and left-hand bushes (3) from the single connecting link.
Remove the oil seals (4) from the double connecting link.
Withdraw the pin (5).
Remove the roller bearing (6) using a suitable extractor.
Remove the Belleville washer (7).
Remove the seal (8).
Remove both oil seals (9).
Withdraw the pin (10).
Remove the roller bearing (11) using a suitable extractor.
Remove both seals (12).
Remove both oil seals (13).
Withdraw the pin (14).
Remove the roller bearing (15) using a suitable extractor.
Note. Wash all components with clean detergent.