Removing the rear suspension linkages (Aprilia RS125/3)

0

Read 1.2.1 carefully.

Torque wrench settings:

• Linkages to frame (1): 50 Nm (5.0 kg·m)
• Shock absorber to linkages (2): 25 Nm (2.5 kg·m)
• Linkages to swinging arm (3): 80 Nm (8.0 kg·m)

Working from the right-hand side, undo and remove the nut (1).

Withdraw the bolt on the opposite side and collect the washer.



Working from the left-hand side, undo and remove the nut (2).

Withdraw the bolt on the opposite side.

Working from the left-hand side, undo and remove the nut (3).



Withdraw the bolt on the opposite side and collect the washer.

Remove the complete linkage assembly.

See this article in russian language

Removing the rear suspension rocker and swinging arm Ducati ST2 (1997-2003)
Exploded view — rear suspension units Triumph Rocket III (2004-2018)
Lubricating the rear suspension Yamaha FZ1 Fazer (2006-2015)
Rear swingarm and suspension — design description Suzuki DRZ 250 (1996-2007)
Rear suspension swingarm — inspection, removal and… Honda CB 400 SF (1992-1999)

Article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005): «Removing the rear suspension linkages»: https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/rsusp/112904 <a href="https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/rsusp/112904">Removing the rear suspension linkages</a> - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Rear suspension». [url=https://motoinstruction.ru/en/Aprilia/RS/RS125-3/chassis/rsusp/112904]Removing the rear suspension linkages[/url] - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Rear suspension».