Removing and installing taper roller bearing in rear wheel drive (BMW R1150GS)

0

Remove needle roller bearing with counter-support 22/1, BMW No. 008572, and internal puller 21/4, BMW No. 008573, with ring support.

Heat neck of housing to 120°C (248°F).

Press in needle roller bearing with inner race with driver, BMW No. 363700.

See this article in russian language

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Removing and installing taper roller bearing in rear wheel drive»: https://motoinstruction.ru/en/BMW/R/R1150GS/chassis/rsusp/111714 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/chassis/rsusp/111714">Removing and installing taper roller bearing in rear wheel drive</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Rear wheel drive». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/chassis/rsusp/111714]Removing and installing taper roller bearing in rear wheel drive[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Rear wheel drive».