Rear brake hose routing
1. Stopper; 2. Reservoir; 3. Brake cylinder; 4. Brake hose; 5. Brake caliper; 6. Clamp; 7. Face the tip of clamp to backward; 8. Face the tip of clamp to upper; 9. Starter motor lead wire; 10. Insert the reservoir hose fully to the reservoir and brake master cylinder; 11. Face the white paint on reservoir hose to forward; 12. Tighten the hose guide bolt after positioning the stopper of hose guide to the swingarm; 13. Fix the grommet of brake hose to the hose guide; 14. Fix the brake hose to the clamp; 15. Master cylinder cover; 16. Reservoir hose; 17. Pass the reservoir hose inside of the master cylinder cover; 18. Do not contact the hose and muffler; 19. Tighten the brake hose union bolt to the specified torque after touching the brake hose union to the stopper.