- Clean the caliper bores and pistons with specified brake fluid, especially the dust seal grooves and piston seal grooves.
Specification and classification: DOT 4
Caution:
- Clean the caliper components with fresh brake fluid before reassembly. Never use cleaning solvent or gasoline to clean them.
- Do not wipe the brake fluid off after cleaning the components.
- When cleaning the components, use the specified brake fluid. Never use different types of fluid or cleaning solvent such as gasoline, kerosine the others.
- Replace the piston seals and dust seals with new ones when installing them. Apply the brake fluid to both seals when installing them.
Piston seal
- Install the piston seals as shown in the illustration.
Brake caliper holder
- Apply SUZUKI SILICON GREASE to the brake caliper holder.
- 99000-25100: SUZUKI SILICONE GREASE or equivalent
Rubber boot
- Set the rubber boot onto the brake caliper.
