If the motorcycle is to be exposed to temperatures below -31°C (-24Т), this mixing ratio should be incleased up to 55% or 60% according to the figure.
| Anti-freeze density | Freezing point |
| 50% | -31°С (-24°F) |
| 55% | -40°C (-40°F) |
| 60% | -55°C (-67°F) |
Caution:
- Use a high quality ethylene glycol base anti-freeze, mixed with distilled water. Do not mix an alcohol base anti-freeze and different brands of anti-freeze.
- Do not rut in more than 60% anti-freeze or less than 50%. (Refer to Right figure.)
- Do not use a radiator anti-leak additive.
50% Engine coolant including reserve tank capacity.
| Anti-freeze | 1100 ml (2.3/1.9 US/Imp.pt) |
| Water | 1100 ml (2.3/1.9 US/Imp.pt) |
Fig. 1 Engine coolant density-freezing point curve.
Fig.2 Engine coolant density-boiling point curve.
Warning:
- You can be injured by scalding fluid or steam if you open the radiator cap when the engine is hot. After the engine cools, wrap a thick cloth around cap and carefully remove the cap by turning it a quarter turn to allow pressure to escape and then turn the cap all the way off.
- The engine must be cool before servicing the cooling system.
- Coolant is farmful;
- If the comes in contact with skin or eyes, flush with water.
- If swallowed accidentally, induce vomiting and call physecian immediately.
- Keep it away from chiledren.