- Throttle position sensor (from the throttle body)
2. Check:
- Throttle position sensor maximum resistance
Out of specification → Replace the throttle position sensor.
Throttle position sensor resistance k
a. Connect the pocket tester (
x 1 k) to the throttle position sensor terminal as shown.
Pocket tester 90890-03112.
Analog pocket tester YU-03112-C.
- Positive tester probe: Blue "1"
- Negative tester probe: Black/Blue "2"
b. Measure the throttle position sensor maximum resistance.
3. Install:
- Throttle position sensor
When installing the throttle position sensor, adjust its angle properly. Refer to "Adjusting the throttle position sensor".