Check idle speed (see Fuel System chapter).
Stop the engine and remove the carburetor.
Caution! Do not turn the idle adjusting screw when removing the carburetor.
Connect the throttle sensor setting adapter to the sensor lead connectors (see Throttle Sensor Inspection).
Special Tool - Throttle Sensor Setting Adapter: 57001-1408
Loosen the throttle sensor mounting screws [А].
Turn on the ignition switch.
When installing the sensor, tighten the screws gradually and alternately.
Torque - Throttle Sensor mounting Screw: 3.4 N·m (0.35 kg·m, 30 in·lb)
Adjust the position of the throttle sensor until the output voltage is within the specified voltage.
Throttle sensor output voltage. Standard: 0.95-1.05 V
★ If it is not within the specified voltage, replace the sensor.
When installing the sensor, tighten the screws gradually and alternately.
Torque - Throttle Sensor Mounting Screw: 3.4 N·m (0.35 kg·m, 30 in·lb)