2. Remove:
- Fuel tank breather hose
- Fuel tank overflow hose
- Fuel pump coupler
- Fuel sender coupler
- Fuel hose connector cover
- Fuel hose
Warning: Cover fuel hose connections with a cloth when disconnecting them. Residual pressure in the fuel lines could cause fuel to spurt out when removing the hoses.
Notice: Be sure to disconnect the fuel hose by hand. Do not forcefully disconnect the hose with tools.
- To remove the fuel hose from the fuel pump, press the two buttons "1" on the sides of the connector, and then remove the hose.
- Before removing the hoses, place a few rags in the area under where it will be removed.
![](https://motoinstruction.ru/img/yamaha/20/126838.jpg)
3. Remove:
- Fueltank
Do not set the fuel tank down so that the installation surface of the fuel pump is directly under the tank. Be sure to lean the fuel tank in an upright position.