| Fault code No. | Er-2 |
| Symptom | No signal is sent from ECU. |
| Fail-safe action | Engine startup: Possible |
| Riding: Possible | |
| Diagnostic monitoring code No. | |
| Meter display | |
| Checking method |
| Item/components and probable cause | Check or maintenance job | Sensor inspection procedure | |
| 1 | Connection of meter coupler. Check the connection of the coupler is secure. Remove the coupler, and check each pin (for bending, wear, or locking). | Poor connection → Connect it securely, or repair/replace the wire harness. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
| 2 | Connection of main harness ECU coupler. Check the connection of the coupler is secure. Remove the coupler, and check each pin (for bending, wear, or locking). | Poor connection → Connect it securely, or repair/replace the wire harness. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
| 3 | Continuity of wire harness | Open or short circuit → Connect it securely, or repair/replace the wire harness. Yellow/Blue-Yellow/Blue | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
| 4 | Abnormal meter unit operation | Replace the meter unit. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
| 5 | ECU malfunction | Replace the ECU. |