Fault code No. | 60 |
Symptom | Defect Found in YCC-T Drive Type |
Fail-safe action | Engine startup: Possible under certain conditions |
Riding: Possible under certain conditions | |
Diagnostic monitoring code No. | |
Meter display | |
Checking method |
Item/components and probable cause | Check or maintenance job | Sensor inspection procedure | |
1 | Connection of throttle servo motor coupler. Check the connection of the coupler is secure. Remove the coupler, and check each pin (for bending, wear, or locking). | Poor connection → Connect it securely, or replace the wire harness. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
2 | Connection of main harness ECU coupler. Check the connection of the coupler is secure. Remove the coupler, and check each pin (for bending, wear, or locking). | Poor connection → Connect it securely, or replace the harness. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
3 | Check the ETV (Electronic Throttle Valve) fuse. | Abnormality → Replace the ETV (Electronic Throttle Valve) fuse. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
4 | Continuity of wire harness | Open or short circuit → Replace the wire harness. Light green/Red-Light green/Red Yellow/Red-Yellow/Red | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step |
5 | Throttle servo motor malfunction | Refer to "Checking the throttle servo motor". Throttle servo motor malfunction → Replace the throttle body. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
6 | Throttle body malfunction | Refer to "Adjusting the throttle position sensor". Throttle body malfunction → Replace the throttle body. | Place the main switch to the ON position, and check the fault code indication. No fault code indicated. → Recovered. Fault code indicated. → Check the next step. |
7 | ECU malfunction | Replace the ECU. |