1. Clock/stopwatch
To set the clock
1. Push the "SELECT" button and "RESET" button together for at least two seconds.
2. When the hour digits start flashing, push the "RESET" button to set the hours.
3. Push the "SELECT" button, and the minute digits start flashing.
4. Push the "RESET" button to set the minutes.
5. Push the "SELECT" button and then release it to start the clock.
To display the stopwatch
To change the display to the stopwatch mode, push the "SELECT" button and "RESET" button together. To change the display back to the clock mode at any time, except when the stopwatch is counting, push the "SELECT" button and "RESET" button together.
Standard measurement
1. Push the "RESET" button to start the stopwatch.
2. Push the "SELECT" button to stop the stopwatch.
3. Push the "SELECT" button again to reset the stopwatch.
Split-time measurement
1. Push the "RESET" button to start the stopwatch.
2. Push the "RESET" button or start switch "®" to measure split-times. Split-times are displayed on the odometer display for five seconds.
3. Push the "RESET" button or start switch "®" to display the final split-time or push the "SELECT" button to stop the stopwatch and display the total elapsed time.
Split-time history
1. Coolant temperature display/air intake temperature display; 2. Stopwatch
The split-time history displays up to 20 stored split times. The split-time history can be displayed either in reverse chronological order or by speed.
1. Push the "SELECT" button for at least one second to select the reverse chronological order mode; "L20" displays on the stopwatch.
Push the "SELECT" button again to select the speed mode; "F20" displays on the stopwatch.
2. Push the "RESET" button. Depending on the selected split time, "L20" or "F20" displays on the coolant temperature display/ air temperature display, and its corresponding stored split time displays on the stopwatch.
3. Push the "SELECT" button to move down, and the "RESET" button to move up through the list.
- When displaying in the reverse chronological order, the split times are shown from the latest to earliest (i.e., L20, L19, L18, L17).
- When displaying in the speed order, the split times are shown from the fastest to slowest (i.e., F01, F02, F03, F04).
- Push the "RESET" button for at least one second to reset all the recorded times for the selected split-time history.
4. Push the "SELECT" button for at least one second to cancel the split-time history and return to the time measurement.