2. See Figure 7. Press the function button until the time appears on the screen (hours and minutes). Press and hold the function switch button for approximately five seconds, or until 12HR flashes in the speedometer window. Release the button.
3. Press and release the function switch until 24HR flashes in the speedometer window. Each time you press and release the button, the display will switch from 12HR to 24HR mode.
4. After you select the desired time format, press the function switch button and hold it pressed for 5 seconds. The display will show the time and the hour digits will flash.
5. Press the function button several times and select the appropriate hour. Each time you press the button, the display will increase by 1 hour.
Note. Indicate what time is selected (AM – before noon or PM – after noon) not required. Once the correct hour is set, press and hold the function switch button to move to the minute setting.
6. After you select the desired hour, press the function switch button and hold it pressed for 5 seconds. The minutes will start flashing on the display.
7. Press the function button several times and select the appropriate minute value. Each time you press the button, the display will increase by 1 minute.
8. After you select the desired number of minutes, press the function switch button and hold it pressed for 5 seconds. The minutes on the display will stop flashing, indicating that the clock has been set.
9. Turn the ignition switch to the OFF position.
Figure 7. Dashboard: 1. Tachometer; 2. Speedometer; 3. A device showing the amount of fuel in the tank; 4. Display of the trip meter, daily trip meters, hours and kilometers, corresponding to the amount of fuel in the tank; 5. Switch for resetting the odometer and setting the clock