Inspecting the rear suspension linkage system (Aprilia RS125/3)

0

Read 1.2.1 carefully.

Check bearings every 4000 km (2485 mi).

Note. An assistant will be required to keep the vehicle upright during the procedure.

Hold the tail of the motorcycle firmly with your hands. Press down and release repeatedly.

If you feel any hardness or play, or hear squeaking noises, change the bearings of the rear suspension linkage system; see 7.12.3.

This article is taken from a source: MOTOINSTRUCTION



Press down the vehicle tail. If the tail is slow to spring back up when released, check rear suspension adjustment; see 2.17.2.

If the problem persists after the adjustment, it means that the shock absorber is depressurised. Charge the shock absorber.

See this article in russian language

Rear suspension linkage — removal, inspection and… Honda Africa Twin 750 (1989-2003)
Exploded view — rear suspension units Triumph Rocket III (2004-2018)
Lubricating the rear suspension Yamaha FZ1 Fazer (2006-2015)
Rear brake system — design description Suzuki DRZ 250 (1996-2007)
Rear suspension exploded view Kawasaki ZX6R/ZX600J (2000-2002)

Article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005): «Inspecting the rear suspension linkage system»: https://motoinstruction.ru/en/Aprilia/RS/RS125-3/owner/service/112784 <a href="https://motoinstruction.ru/en/Aprilia/RS/RS125-3/owner/service/112784">Inspecting the rear suspension linkage system</a> - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Maintenance». [url=https://motoinstruction.ru/en/Aprilia/RS/RS125-3/owner/service/112784]Inspecting the rear suspension linkage system[/url] - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Maintenance».