Inspecting front and rear wheel bearings, replacing if necessary (BMW F650GS)
- Main
- BMW
- F-series
- F 650 GS
- Information for owner
- Maintenance
- Inspecting front and rear whee…
(Inspection III)
Lift front/rear wheel of the ground.
Tilt the front/rear wheel to and fro on the axle.
No play should be detected.
Replace the bearings if play is detected.
Note: Check play when bearings are cold.
Lift front/rear wheel of the ground.
Tilt the front/rear wheel to and fro on the axle.
No play should be detected.
Replace the bearings if play is detected.
See this article in russian language
This article has been reviewed: Kirill Prokofiev
Similar articles about motorcycles of other brands
Front and rear wheel — exploded view Triumph Street Triple 765 (2017-2024)Checking and replacing the rear wheel sprocket Yamaha FZ1 Fazer (2006-2015)
Front, Rear Wheel Rotation Difference Abnormal (Service… Kawasaki Versys 650 (2007-2025)
Front wheel — replacement of bearings and seals Honda CB 400 SF (1992-1999)
Inspecting the rear wheel components Aprilia RS 125/3 (1998-2005)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Engine and systems
- Engine repair
- Ignition system
- Fuel and exhaust systems
- Cooling system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Lighting and lamps